The inner wall of the V-type mixer body is finished by a large vertical lathe to ensure that the movable scraper can scrape away the materials on the inner wall of the body and the bottom of the bus when rotating. The other two groups of high-speed d...

1. The bearing bears all the loads of the machine, so good lubrication has a great impact on the life of the bearing, which directly affects the service life and running rate of the machine. Therefore, the lubricating oil injected must be clean, and ...

1. The horizontal mixer shall be selected according to the daily production. Since the processing time of each batch of materials in the mixer is about 10 minutes, plus the time for discharging and feeding, the processing time of each batch of materi...

Some manufacturers do not pay attention to the selection of models when selecting mixing equipment, which will cause many problems in the actual processing and production process. Therefore, when purchasing equipment, they should first pay attention ...

1. After the ultra-fine pulverizer is unpacked, carefully check whether the equipment is damaged during transportation, and then put the high-speed pulverizer and auxiliary electronic control device in place, and then connect them to the main and aux...

1. Backjet at the feed inlet: improper adjustment of the air valve, blockage of the conveying pipe, blockage of the screen hole, too short or poor permeability of the powder collecting bag, severe abrasion of the hammer edge, etc. will cause backjet ...

1. Bearing overheating. The user should pay special attention to the temperature rise of the bearing and the noise at the bearing part, and handle the abnormal situation as soon as possible. Causes and solutions: ① Too much, too little or aging of lu...

1. The equipment shall be operated and watched by professional personnel during operation. 2. Necessary maintenance tools and sufficient spare parts shall be provided 3. Do not sprinkle water on the motor and bearing seal during cleaning 4. When the ...

1. At this time, samples will be taken from the finished product area to test the fineness of finished powder. When the fineness exceeds the index, the speed of the grading wheel can be adjusted downward. 2. Every time the speed of the grading wheel ...

The spice grinder should be a relatively high-precision facility. In the usual application and maintenance process, some key points still need to be paid attention to by the control staff. In order to improve the crushing rate of the spice grinder, i...

The operation process of the food shredder, the main content contained in it is the food shredder, and other impurities or sundries are not allowed, because this will destroy the equipment. Before the equipment is started, it is necessary to check th...

Pulverizers are mainly used in pharmaceuticals, chemical plants, smelting, food, housing construction and other fields. Protection and maintenance of the food grinder: Before application, check whether all the standard parts of the equipment are tigh...

When we clear the spice grinder, we can't do it hastily, but we need to clear it carefully. First, it needs to be washed once, then carefully cleaned with a soft brush, and disinfected if necessary. After cleaning, you can soak the spice grinder, spr...

The key operating component of the food shredder is the rotor assembled on the equipment, which uses the rotor to smash through rotation and drum impact. It is currently the most widely used economical industrial equipment. It usually consists of fiv...

The spice pulverizer is designed and scientifically researched by the mechanism of the mixing powder spraying method. It is mainly used in the fields of catering, chemistry, etc., and is very common. The spice crusher has a simple structure, and the ...