1. At this time, samples will be taken from the finished product area to test the fineness of finished powder. When the fineness exceeds the index, the speed of the grading wheel can be adjusted downward.
2. Every time the speed of the grading wheel is adjusted, the fineness of the finished powder shall be sampled and tested at intervals.
3. When the speed of the grading wheel decreases, the current of the host machine will also decrease. At this time, the feeding frequency can be gradually increased to increase the crushing output.
4. At the same time, adjust the opening range of the air door of the high-pressure fan and detect the current of the high-pressure fan to ensure a certain amount of air volume and ensure that the fan can work normally for a long time.
5. If the output and fineness of the spice crusher can not meet the requirements due to material differences, the grading wheel can also be rotated in the same direction as the host machine. Other debugging methods are the same as above.
Share to: 0 Add to Favorites | Back to List | Back to Top