1. Because the feed speed is too fast, the load increases instantly, forming a blockage. So when feeding, pay attention to the current pointer. If it is overloaded, it should be reduced in time, because the motor will burn out for a long time. Or cha...

1. When installing a superfine pulverizer, select it according to its characteristics and structure, and further determine the production organization and form; 2. When purchasing, you can decide which kind of wood crushing equipment to choose accord...

1. The nature of raw materials. Raw materials have many properties, such as brittleness, toughness, fiber, sugar, oil, etc. The properties of raw materials should be determined before crushing, and then different methods should be adopted for materia...

1. After unpacking, carefully check whether the equipment is damaged during transportation, and then our company's technicians will conduct equipment and follow-up training and use. 2. Trial run. Check whether the bolts are fastened, the tightness of...

The superfine pulverizer adopts the form of heavy pressure mill and shear to realize superfine pulverization of dry materials. It consists of cylindrical crushing chamber, grinding wheel, grinding track, fan and material collection system. It can be ...

Ultrafine crushing technology is a high-tech developed rapidly in the past 20 years. It refers to the process of crushing 0.5~5mm material particles to microns or even nanometers (5~25 microns) by mechanical or fluid power. The general crushing techn...

During the operation of the ultrafine pulverizer, the raw material will bounce back into the inner cavity of the equipment after drilling, causing noise. We can add wear pads to solve the impact noise. When working under the ultrafine pulverizer, the...

(1) The rotor of the multifunctional pulverizer is not concentric. The reason is that the two bearing surfaces that support the palm rotor shaft are not in the same plane. The bottom surface of the bearing seat can be padded with a copper sheet, or a...

1. Routine maintenance Routine maintenance should be performed by the equipment operator on duty. Before handover, carefully check the handover records, check the operating equipment, and check the production parameters. During the process, listen to...

It is very important to use ultrafine pulverizers in ports, and they play an important role in the loading and unloading of ships and vehicles. Port loading and unloading are relatively large objects, and the tasks are relatively heavy. The ultrafine...

One of the reasons for clogging is that the feed rate is too fast and the load increases. Solution: Be careful when using the crusher. During the feeding process, be sure to pay attention to the large deflection angle of the ammeter pointer. If the c...

1. Equipment speed: The speed of the equipment is mainly adjusted by the frequency conversion controller. High speed will produce fine powder and slightly lower output value; if the speed is low, the material will be coarser and output value will be ...

The work of the superfine pulverizer requires power, and the machine is driven by a motor or a diesel engine to start the power supply. The motor wheel or the diesel engine wheel drives the main wheel to rotate through the V-belt drive. The large sha...

1. Too few options At the beginning, many users did not know the specific gas consumption of their own production, so they made a big choice. At this time, the exhaust pressure cannot rise, and if it is lower than the excess exhaust pressure, it will...

The air storage tank of the ultrafine pulverizer is a pressure vessel specially used to store compressed air. The main function of the air storage tank in the air compression system is: 1. Let the compressed air buffer, make the air supply more stabl...