1. Pay attention to the choice of model The working efficiency of the mixer depends to a large extent on the manufacturing accuracy of the equipment itself and the working efficiency of the machine body. When choosing, you should first understand the...

1. Block size. The crushing fineness of the traditional Chinese medicine pulverizer is between 30-150 mesh, but it should be noted that the size of the directly input material should not be larger than 40mm, because the size is too large, it is not o...

1. After turning on the machine, if the crushed material is wet and excessively jams the blade, making the motor unable to rotate, and there will be a buzzing noise at this time, immediately pull out the power cord to prevent the motor from burning o...

1. Check whether the bearing lubrication is good. 2. Check whether all fasteners are fastened. 3. Check whether the drive belt is installed correctly and in good condition. If the belt is found to be damaged, it should be replaced in time. When there...

1. First check the power socket, plug, and power cord for oxygen, shedding, and breakage. If not, plug it in and try out the machine. 2. When the motor is energized and does not rotate, it can be concluded that one of the two starting capacitors of ...

1. Preparation Before use, the equipment needs to be checked and cleaned. Check whether the equipment is intact and whether all parts are firmly fixed; at the same time, clean up the sundries and dust inside and outside the equipment to ensure the hy...

The first is the overall structural characteristics of the equipment. It is mainly composed of frame, motor, reducer, universal joint, crushing chamber, feeding port, discharging port and other components. Among them, the frame is used as the support...

The operation of the ultrafine crusher requires power, and the machine is driven by an electric motor or diesel engine to start the power supply. The motor wheel or diesel engine wheel drives the main wheel to rotate through V-belt transmission. The ...

1. There are too few choices At the beginning, many users made a big choice without knowing the specific gas usage they were making. At this point, the exhaust pressure cannot be increased. If it is lower than the excess exhaust pressure, it will def...

1. Buffering compressed air, making the gas supply more stable, reducing the frequent start-up of the ultrafine crusher, and allowing compressed air to settle in the air storage tank is more conducive to water and dirt removal. It is mainly used in c...

1. Basic principles of crusher operation Regardless of the reason for the shutdown, empty the material inside the machine and start with no load; 2. Preparation before crushing; a) Determine the variety, amount, and particle size of crushed materials...

The crusher is a part of the crushing room that comes into contact with materials, all of which are made of stainless steel material, which can withstand acid and corrosion, and the crushed materials can better meet hygiene requirements; Smooth opera...

During the production process of the micro crusher, there is no dust flying, and it can improve the utilization rate of materials and reduce procurement costs for enterprises. The micro crusher utilizes high-speed relative motion between the movable ...

1. Strong safety: The parts that come into contact with the material are all polished stainless steel, which is commonly used in medical and food machinery (or can be changed to other metal materials according to user requirements), to avoid the mixi...

1. The ultrafine crusher runs for about a week and needs to be shut down to check if the filtering and dust removal are blocked, and to clean the filtering and film coated dust removal bags. 2. Bearings with oil injection standards should be regularl...