1. Preparation
Before use, the equipment needs to be checked and cleaned. Check whether the equipment is intact and whether all parts are firmly fixed; at the same time, clean up the sundries and dust inside and outside the equipment to ensure the hygiene and safety of the materials.

2. Preparation before starting up
Turn on the power switch through the control panel, wait for the equipment to warm up, open the lid of the feeding port, and put the Chinese medicinal materials to be processed into the equipment.

3. Adjust parameters
Adjusting parameters is a key step in the operation, because different Chinese herbal medicines require different processing parameters, including speed, temperature, time, etc. Usually, it can be adjusted by referring to the equipment manual or experience value.

4. Start processing
After the parameter setting is completed, press the start button and the equipment will start to run. During the processing, it is necessary to pay attention to observe the operation of the equipment to ensure that the processing effect is good.

5. Collect powder
After the processing is completed, open the powder collection port to collect the powder. It should be noted that when collecting the powder, the powder should be cleaned from the inside of the equipment so as not to affect the next use.

6. Shutdown processing
After use, turn off the power, and disassemble the internal parts of the device for cleaning. It should be noted that the different materials must be cleaned to avoid contamination.