1. After turning on the machine, if the crushed material is wet and excessively jams the blade, making the motor unable to rotate, and there will be a buzzing noise at this time, immediately pull out the power cord to prevent the motor from burning out. Remove the jammed object, then close the upper cover tightly, press the power button, and restart the machine.
2. If the machine automatically shuts down during operation, be sure to clean up the medicine in the bucket, turn the hammer with an object, and start the machine after it is loose. If the watch pointer is still high after the material is not discharged, please stop the powder machine, clean out the remaining material in the warehouse, and clean the mesh.
3. The crushing time should not be too long to prevent the fine powder from heating and sticking to the groove after crushing. The use time of the machine should not be too long. When the machine is hot, please wait for the body to cool down before continuing to use it to prevent the bearing from overheating and damage the click. At the same time, the high temperature will affect the crushed medicinal materials.
4. If the noise of the machine is too loud or there are sparks, stop the machine for inspection and turn off the power switch in time. When the machine has sound and the machine cannot rotate, please turn off the power immediately. If the power is not turned off, it will burn the insulated wire inside the motor and emit a bad smell.
5. If the indicator light on the machine is defective, it means that the fuse is blown and needs to be replaced.
6. It is strictly forbidden to wash the crushing tank of the Chinese herbal medicine ultrafine pulverizer with water, and it is strictly forbidden to open the upper cover after turning on the machine. When not in use, please place it in a dry, clean and ventilated place.