The reason for the asymmetry of the V-shaped mixer: the mixing cylinder is two asymmetric cylinders, which are formed by round-tight welding of δ3mm304 high-quality stainless steel rings, and the two ends of the V-shaped mixing cylinder adopt oval he...

First of all, we need to prepare the materials to be mixed and the three-dimensional mixer. Before using the three-dimensional mixer, we need to make sure that all parts of the three-dimensional mixer are clean. If the three-dimensional mixer is not ...

1. Check whether there is any foreign matter in the crushing chamber (it must be empty before starting the machine), and turn on the power. 2. Tighten the upper cover and the butterfly nut of the crushing chamber. 3. Start the motor, run it empty for...

1. Clean the crusher cabin. The shredder cabin is also what we call the "shredding bin". The crushing of objects is carried out in the shredding bin, so it is the key cleaning part. The main fixing part of the crushing bin and the motor is at the "kn...

Under the background of the rapid development of the Chinese medicine industry due to the favorable environment, the market prospect of Chinese medicine pulverizers is broad, and the team of its manufacturers is gradually increasing. Chinese medicine...

The traditional Chinese medicine pulverizer uses the relatively high-speed operation between the movable toothed disc and the fixed toothed disc, so that the crushed material is crushed through the impact and friction of the toothed disc and the coll...

1. The super fine grinder runs every week or so, and needs to be shut down to check whether the filter and dust removal are blocked, and to clean the filter and film-coated dust removal bag. 2. If the bearing has an oil filling standard, add high-tem...

1. When the bearing oil temperature rises, stop the machine immediately to check the cause of the fault and remove it. 2. Pay attention to the degree of wear of the easily worn parts, pay attention to it at any time and be ready to replace the worn p...

1. Super fine grinder and power unit should be installed firmly. If the super fine grinder is fixed for a long time, it should be fixed on the cement foundation; if the grinder is mobile, the unit should be installed on the frame made of angle iron, ...

One: super fine grinder operating procedures 1. Check whether there is oil in the lubricating place before starting the machine. 2. Remove metal, sand, stone and other sundries in the material to prevent damage to the machine parts. 3. Do not put you...

1. For newly installed equipment, when the equipment is in place and the bin to be crushed is connected, it is inevitable that foreign objects such as iron pieces, welding rod heads, and welding slag will remain. When the fan and the main motor are n...

1. Material properties The properties of the material include comminuted material properties and density. The crushed material of the jet mill is taken out of the crushing chamber by the negative pressure airflow caused by the fan, enters the materia...

The properties of the material include comminuted material properties and density. The crushed material of the jet mill is taken out of the crushing chamber by the negative pressure airflow caused by the fan, enters the material collection system, is...

This item mainly refers to the humidity and temperature of the material. The degree of super fine grinder is different from that of wet grinding. In dry grinding, if the water content of the enterprise’s materials does not exceed 3%, the processing t...

1. The ultrafine pulverizer runs every week or so, and needs to be shut down to check whether the filter dust removal is blocked, and clean the filter film-coated dust removal bag. 2. If the bearing has an oil filling standard, add high-temperature b...