1. Check whether there is any foreign matter in the crushing chamber (it must be empty before starting the machine), and turn on the power.
2. Tighten the upper cover and the butterfly nut of the crushing chamber.
3. Start the motor, run it empty for 1-2 minutes, then gradually feed the material to be punched from the feeding tray, and the feeding should not be too fast and too much.
4. If the material is stuck and the motor does not turn, please turn it off immediately to avoid burning the motor. After removing the stuck material, you can continue to use it.
5. During the use of the herbs grinder, it is strictly forbidden to open the upper cover and put your hands into the grinding chamber.
6. Herbs grinder is a dry type grinder, which is not suitable for crushing wet and greasy things.
7. Please replace the different screens according to the needs.
8. Herbs grinder adopts an overheat protector. If the motor load is too large, it will stop automatically. If you continue to operate, please press the protector again.