1. Clean the crusher cabin. The shredder cabin is also what we call the "shredding bin". The crushing of objects is carried out in the shredding bin, so it is the key cleaning part. The main fixing part of the crushing bin and the motor is at the "knife head" inside the engine room. The top of the knife head is fixed by a stainless steel screw. Just loosen the screw here with a wrench and take off the blade to separate the engine room from the motor. When separating, pay attention to unplug the link wire. The cleaning tools for the crushing bin involve special wrenches, brushes, etc. The pulverizer is equipped with a special wrench, which is just convenient to use when disassembling the cutter head.
2. Other parts of grinding and cleaning: mainly cleaning the screw cap and external parts of the pulverizer. These places can be used to brush gently with a brush, and clean it with water or detergent if necessary. Spray the product with water to soak it, then pour it into the washing liquid, and stir the washing liquid and water evenly, so that it can evenly cover the surface of the product, so that the dirt will gradually become less sticky during this process Herbs grinder. A small household grinder can soak the brush and start scrubbing the surface and interior. This cleaning will make most of the dirt off the product in an instant, whether it is on the surface or inside. After this process is completed, rinse the pulverizer with clean water to avoid re-contamination of the product by the dirt that has fallen off, because the phenomenon of secondary adhesion is relatively bad.
Another method is to use a washing machine for herbs grinder cleaning, fill the washing machine with water and detergent, and then put the herbs grinder that needs to be cleaned into it. After that, the washing machine starts to operate, and the water flow inside will generate a strong flow force, which makes a large amount of dirt inside the pulverizer fall off and is not easy to attach to it again due to the rapid flow of water. The effect is also very ideal. Clean the herbs grinder with clean water afterward, and then carry out relevant drying work, so as to avoid unnecessary loss caused by excessive moisture remaining.