The traditional Chinese medicine pulverizer uses the relatively high-speed operation between the movable toothed disc and the fixed toothed disc, so that the crushed material is crushed through the impact and friction of the toothed disc and the collision between materials. The pulverized material can be directly discharged from the grinding cavity and come out through the discharge port. After the general material is pulverized, it will be collected in a cotton bag. The fine powder is discharged, so as to achieve the effect of no waste and no pollution. The machine is composed of a feeding hopper, a crushing hammer, a tooth plate, a crushing motor, and fan blades. The material enters the crushing chamber from the feeding hopper, and is crushed by the high-speed rotating hammer. The fineness can be adjusted at will. The high-speed rotating paging sends the material that meets the requirements from the crushing chamber to the receiving bag, and the material that does not meet the requirements continues in the crushing chamber. crushed. The machine complies with GMP certification standards.
Features:
(1) High fineness and fast speed. This series of models all adopt small ultra-high-speed motors, and the strong power ensures the fineness and speed of crushing.
(2) Small size, light weight, compact structure, no vibration, no need to fix, thus ensuring that it can be used in any occasion.
(3) Good safety performance, no dust, low loss, easy to clean, because this series of models are intermittent crushing, so the crushing chamber is a fully enclosed stainless steel tank structure, which ensures the realization of the above performance.
(4) It has a wide range of applications. Vegetable fibers, high hardness and high toughness materials, such as Chinese herbal medicines, inorganic substances, minerals, etc., can achieve good crushing effects.
(5) The control performance is good, and the fineness can be adjusted arbitrarily. Since the machine can be turned on and off at any time, the purpose of fineness control can be achieved by controlling the length of crushing time.
The pulverization time of traditional Chinese medicine pulverizer is not as short as possible, nor as long as possible. In order to help you achieve a more ideal pulverization effect, we classify different materials and suggest different pulverization methods for better results. When crushing fibrous materials, because this type of material itself has a fibrous structure, it cannot be crushed into powder, and usually becomes floc after crushing, which is related to the structure of the material itself. It is recommended to crush such materials at intervals, every 10 seconds; similar crushed materials such as: iron maple bucket, ganoderma lucidum, etc. When crushing oily materials, it is recommended to crush at intervals, and pause once every 10 seconds (about 5 seconds) to check the crushing effect until you are satisfied. During continuous crushing, the machine heats up and easily pastes off, and the effect is not good; similar to crushing Materials such as: sesame, peanut, walnut, flax, flax, sunflower, etc. Smash is done. When the set time is reached, the crushing is completed. There is no style with a timer switch. You need to master the time yourself. Generally, when the rolling sound in the crushing chamber is relatively uniform, it means that the powder has been powdered, and you can shut down. Each time after the crushing is completed, let the machine run dry for 2 minutes, and suck up the remaining materials. After shutting down, open the machine cover to check whether the parts are damaged, and close the machine cover after removing the remaining materials.
