The air storage tank of the ultrafine pulverizer is a pressure vessel specially used to store compressed air. The main function of the air storage tank in the air compression system is:

1. Let the compressed air buffer, make the air supply more stable, reduce the frequent start-up of the ultrafine pulverizer, and let the compressed air settle in the air storage tank, which is more conducive to water and pollution removal. It is mainly used in conjunction with ultrafine pulverizers, refrigerated dryers, filters and other equipment, and also plays a very important role in the compressed air of ultrafine pulverizers.

The air storage tank at the outlet of the ultrafine pulverizer plays the role of stabilizing the air outlet pressure and buffering. Since the air consumption at the end of the compressed air system is generally impossible to be stable at all times, the air storage tank should be used to balance the stability and stability of the system pressure. Reduces frequent loading and unloading of the ultrafine grinder.

2. Prevent the compressed air pipeline from returning liquid for some reason during the shutdown of the ultrafine pulverizer, and pour it into the ultrafine pulverizer because of damage.

3. Cool the dried compressed air again to reduce the moisture content in the compressed air, and let the compressed air settle in the air storage tank to facilitate water and pollution removal.

The basic requirements for the selection of gas storage tanks are as follows:

1. The volume of the gas storage tank should be between 10 points and 20 points of the displacement of the compressor. We generally choose 15 points. When the gas consumption is large, the volume of the gas storage tank should be increased appropriately. Large, if the on-site gas consumption is small, it can be lower than 15 points, preferably not lower than 10 points.

2. The processing capacity of the dryer and filter should be consistent with the displacement of the compressor.

3. The filter before the dryer should be equipped with an automatic drainer.

4. When using an adsorption dryer, the compressor should reserve the corresponding gas consumption.

5. The dryer is installed behind the gas storage tank. The function of the gas storage tank is more fully reflected, and it plays the role of buffering, cooling and sewage discharge, which can reduce the load of the dryer and is used in the working condition of the system with a more uniform gas supply. The dryer is installed before the gas storage tank, and the system can provide a large peak adjustment capability, which is mostly used in working conditions with large fluctuations in gas consumption.

Therefore, it is very necessary to install an air storage tank for the ultrafine pulverizer. Only by rationally utilizing the air storage tank and the supporting equipment of the ultrafine pulverizer can the mechanical equipment play a greater role.