1. Pay attention to check and maintain the external body of the ribbon mixer, and regularly remove the dirt and obstacles on the horizontal ribbon mixer.
2. It is necessary to regularly check the oil, circuit and control equipment at each lubrication point, and add lubricating oil as required to prevent equipment from aging.
3. Before the daily operation of the ribbon mixer, firstly, it should be idling for 1--2 minutes, and at the same time, the reliability of the clutch and braking device on the machine should be checked.
4. During the operation of the equipment, listen to whether the noise of the motor, reducer and transmission gear is normal, and whether the temperature rise is too high. If there is a problem, the operation should be stopped immediately for inspection until it returns to normal operation.
Ribbon mixers have a wide range of applications. Some non-ferrous metal enterprises have long production processes, strong continuity, and harsh working environments; the working environment of mine ribbon mixers is even worse. Working in the open air under the sun and rain, these ribbon mixer equipment will also produce dust, noise or harmful substances during use, which will pollute the environment and endanger personal safety and health; most of the ribbon mixer equipment in chemical plants are used in high temperature, Working under conditions of high pressure, high vacuum, and strong corrosion, or working in a smoky, dusty, flammable and explosive environment, not only corrodes and wears quickly, but also causes explosions, fires, and poisonous gas pollution due to poor management. vicious accident. Therefore, it is very important to strengthen the daily maintenance, safety and pollution protection of ribbon mixer equipment, and take the road of combining maintenance and overhaul to ensure safety.