1. Start the reverse button of the V-type mixer, adjust the motor speed, and run slowly.
2. During the operation of the V-type mixer, the body should stop at a constant speed without abnormal noise.
3. Open the feed port of the mixer, and reconfirm that the discharge port is closed, and put a specified amount of material into the V-shaped hopper according to the process control requirements.
4. After the feeding is finished, close the feeding port and lock it tightly to prevent the material from flowing out during mixing.
5. After the mixing reaches the time specified in the process, stop the machine by adjusting the motor speed button. When stopping, make the discharge port of the mixer face the air, and adjust the motor speed button to 0. The V-type mixer will stop the button Rotate to the right, cut off the power, and stop discharging.