1. Open the feed port of the mixer, and reconfirm that the discharge port is closed, and put a specified amount of material into the V-shaped hopper according to the process control requirements. the

2. After feeding, close the feeding port and lock it tightly to prevent the material from flowing out during mixing. the

3. Start the rotation button of the V-type mixer, adjust the motor speed, and rotate slowly. the

4. During the operation of the V-type mixer, the body should run at a constant speed without abnormal noise. the

5. After the mixing reaches the time specified in the process, stop by adjusting the motor speed button. When stopping, make the discharge port of the mixer face the ground, and adjust the motor speed button to 0, and the V-shaped mixer will stop. Turn the button to the right to cut off the power.