Check the running position of the blade, from the position of the feed port. The blade should run in the opposite direction, otherwise the motor wiring should be adjusted; before feeding, the machine should be idling for 30 minutes, and then feeding can be done without any abnormality; it must be run with no load, and the peanut and sesame grinder can be loaded after the normal operation. . The shutdown sequence is the opposite of the startup sequence.

If the operation is wrong, materials are added to the cavity of the peanut and sesame grinder that is not running, and the machine cavity must be cleaned before it can be run. Otherwise, the equipment and motor will be damaged; during the operation process, there should be no strong vibration and abnormal noise, otherwise, it should be stopped for inspection; the running sequence of the peanut sesame grinder and the conveying equipment is: unloading → → loading.

Strive for continuous and balanced feeding; the feeding powder is strictly in accordance with the regulations, and it is not allowed to add more than the specified material to the rock breaker. Otherwise, it will cause the unbalance of the blade and excessive damage to the blade, which will lead to the blockage of the blade inlet and the core feed pipe. The pulverizer cannot be operated routinely, and it should be removed immediately if it is found that the whole piece of feeding material is found; it is not allowed to run the advanced material with material without trial operation; when the unloading machine equipment stops, the feeding should be stopped immediately, otherwise, it will cause the blades to be crushed and damaged. motor.