1. First open the collection box door of the traditional Chinese medicine grinder, tie a special cloth bag at the material opening, and then close the collection box door.
2. Select the screen according to the technological requirements of the traditional Chinese medicine pulverizer, and install the screen.
3. Also check whether the materials to be pulverized by the traditional Chinese medicine pulverizer need to be pretreated.
4. Turn on the switch of the fan first, and then turn on the switch of the motor, so that the equipment can run normally without load, and then add materials. Then adjust the feeding speed according to the fragility and crushing degree and fineness of the material.
5. At the end of the crushing operation or before stopping the machine, you must stop feeding and let the traditional Chinese medicine grinder continue to run for a few minutes until there is no residue in the crushing chamber.
6. After turning off the motor switch of the traditional Chinese medicine pulverizer, open the door of the collection box and take out the materials for use.
7. If the amount of crushed material is large, you can repeat the operation of the traditional Chinese medicine grinder until all the materials are crushed.
8. After the operation of the traditional Chinese medicine grinder is completed, all power switches need to be turned off.
9. Check the integrity of the equipment components of the traditional Chinese medicine pulverizer, and whether there is any abnormality.