When the V-type mixer is used or stopped, the remaining materials in the V-type barrel shall be taken out and the residual powder in each part of the machine shall be brushed. If it is not used for a long time, all V-mixers must be wiped clean and covered with tarpaulin. The V-shaped bucket shall be disassembled gently, stably installed and placed gently to avoid deformation and damage. Regularly check the machine parts, 1-2 times a month, and check whether the moving parts such as the power shaft, transmission and reducer are flexible and worn. If any defects are found, they should be repaired in time so that the mixer can be used normally.
The V-type mixer is applicable to an ambient temperature of - 5? C—40? C. The relative humidity is less than 90%, the constant temperature zui is appropriate, and it should be placed in a ventilated, dry and clean place. It is strictly forbidden for minor children to touch this machine without permission, so as to avoid accidents. The reducer shall be lubricated by oil immersion. Its oil storage must be kept on the oil mark line and the oil quality must be kept clean. If the reducer is used frequently, it must be replaced with new oil every three months. During replacement, the reducer shall be disassembled and cleaned before adding new oil. The electrical control parts of the mixer shall be kept clean and sensitive, and any fault found shall be repaired in time.
The inside of the V-type mixer is clean and easy to clean. The V-type mixer column frame is made of section steel structure, and the worm gear reducer and gear rotation deceleration are made of carbon structure, meeting the design requirements of the machine operation. The distribution box is equipped with a timing device, which can be switched on and off regularly according to the requirements of materials. V-type mixer has beautiful appearance, uniform mixing and wide application.