If you want to prolong the service life of the conical mixer, it is very important to do a good job of its maintenance, because many users did not pay much attention to this information before, resulting in their equipment not being used for a long time A series of failures occurred. So this is something to do.
Generally speaking, during maintenance, the conical mixer should be managed by a special person, set the inspection record table, and regularly check whether the fan and water pump are running normally every day; whether the liquid level in the liquid storage tank is within the normal scale; and then need to go to the Check to see if its concentration is within the specified range. If you find any problem at this time, you should solve it in time. Then adjust the opening size of the outlet valve of the submerged pump. These places are also more important.
As long as the inspection is done, it can be ensured that the nozzles of the equipment are fully covered with water mist. In addition, what the staff need to know during maintenance is that when the concentration of the conical mixer is lower than 2%, the solution must be added. As a manufacturer, we will help customers solve any problems in time.
When maintaining the conical mixer, in addition to these things you need to figure out, you also need to understand that you can clean it every year according to the usage. Because there will definitely be some dirty things inside when it is used frequently, if it is not cleaned in time, there will be many, many problems. After it is done, you can replace the nozzle and PP filler regularly in order to ensure the treatment effect. And when changing the solution, first turn off the water pump, then drain the saturated solution, then put clean water into the liquid storage tank, and use the water pump to circulate for 30 minutes to clean the nozzle and packing layer.
After these tasks are completed, what you need to do is to switch on and off the fans, water pumps and air valves of the conical mixer. When starting up, first turn on the air valve, then turn on the fan, and then turn on the water pump. And it is a good idea here that when shutting down, turn off the water pump first, and then turn off the fan. The process mentioned here is very important, if you don't understand it, you have to read it carefully.
