1. The double-cone mixer of the mixer manufacturer is easy to clean, just add water to the hopper, the machine starts to rotate, and then drain the water, then it can be cleaned or dry-cleaned;

2. The sealing structure of the mixer manufacturer's double cone mixer is carefully designed, the sealing performance is reliable, the maintenance and disassembly are convenient, there is no dead angle, and the service life is long;

3. The mixing time is short, and the mixing time is determined by materials with different properties;

4. When the double-cone mixer of the mixer manufacturer is discharging, just pull out the plug plate to start or jog to completely discharge the material. In this way, the operation is simple and hygienic, and there is no need to touch the raw materials with hands;

5. Loading and unloading is very convenient. When feeding, add raw materials and several different auxiliary materials at one time, then close the lid, and start the machine to stir according to the set time;

The working principle of the mixer manufacturer's double cone mixer is as follows:

The double cone mixer of the mixer manufacturer uses two asymmetric barrels and uses gravity mixing. Materials are continuously gathered and dispersed in the cylinder. Generally, it takes about 10 to 30 minutes to mix, so that more than two kinds of powdery and granular materials can be fully mixed evenly. It is suitable for mixing two or more materials with large difference in specific gravity. The mixer is equipped with a set of stirring shafts. During the stirring process, the stirring shafts with agglomeration have the function of crushing, and the stirring uniformity can reach more than 99%.

The maintenance method of the double cone mixer of the mixer manufacturer:

1. Installation: place it stably and install the machine feet to make the machine run smoothly.

2. Before use, oil should be filled at the oil filling place, and then no-load operation should be performed to check whether the fasteners are loose, whether the electricity is normal, and whether the mechanical operation is normal. If there is any abnormality, it should be repaired and debugged.

3. According to the actual situation of the customer site, the internal and external cleaning of the equipment can be carried out.

The main purpose of a mixer is to mix a variety of different materials. Reasonable use and maintenance can improve the working efficiency of the mixer.