1. Operation of the ultrafine pulverizer
(1) The operation should be carried out in accordance with the specified requirements, mainly including the "Standard Operating Procedures for Superfine Pulverization Equipment", including start-up operations, etc. The sieve size should be determined according to the particle size required by the production process.

(2) Before operation, operators should wear labor protection equipment to ensure their own safety. In addition, they need to undergo training and assessment before they can go to work.

(3) Operators should be very familiar with and understand the equipment, otherwise they cannot operate the equipment to avoid damage to the equipment.

(4) After the operation is completed, clean the equipment and perform daily maintenance on the equipment.
2. Precautions for ultrafine pulverizer
(1) Whether there is any foreign matter in the crushing cavity of the ultrafine pulverizer. Only after checking that there are no foreign objects can the device be powered on.

(2) Start the motor first and let it run empty for 1 to 2 minutes. After there is no problem, you can start feeding and control the quantity.

(3) When the ultrafine pulverizer is running, it is very dangerous not to open the upper cover or put your hand into the pulverization chamber.