1. Start running with full load and overweight. Solution: lighten the load, run first, then feed.
2. The switching power supply is not connected, or the phase is interrupted. Countermeasure: Please connect the switching power supply and check the routing.
3. The working voltage is too low, countermeasures: avoid power consumption during peak hours or ensure normal working voltage.
Server vibration and noise of small and medium trough mixers, in this case, there are five causes and five corresponding countermeasures: 1. Shaft damage, and countermeasures: remove and replace the shaft.
2. The installation and adjustment are not good. Countermeasure: reinstall and adjust the plane of the mixer.
3. The propeller blades are damaged, countermeasures: remove and replace the propeller blades.
4. The gearbox is damaged, countermeasures: remove and replace the damaged parts of the gearbox.
5. The grease or oil provided by the lubricating oil pump should not be insufficient. Countermeasures: Add grease or remove the oil pump or clear the blockage of the oil pump pipeline.
The small and medium-sized trough-type mixing bucket is leaking. Most of these conditions are due to its sealing, as follows:
1. The viscous material enters the sealing ring, the solution is to clean the sealing ring.
2. The seal is embrittled or damaged. The countermeasure is to remove and replace the seal.