The key point of maintenance of the v-type mixer is to put it in a relatively clean place, a relatively dry and ventilated place, suitable for working in a constant temperature environment. If it is a lubricated reducer, it is used for oil immersion, and the oil storage should be kept on the oil trace line, and it should be relatively clean. If you use a lot, you need to change the oil after three months. During the replacement process, the reducer should be removed and cleaned first, and then the reducer should be cleaned and new oil should be added.
During the maintenance of the V-type mixer, it is more sensitive to use the parts that need to be controlled well, and then keep these parts very clean. If it is when the machine is turned off, or after use, the remaining materials should be removed and some residual powder should be brushed. If the mixer has a long downtime during use, this time the machine needs to be cleaned as a whole, and then covered with a waterproof cloth. Of course, during the assembly and disassembly of the mixing drum, it should be gently removed, then firmly installed, and gently put down to avoid damage. This kind of product still needs to check the parts regularly, once or twice a month.
The maintenance of the v-type mixer needs to pay attention to the above methods. If it can be carefully maintained, it will be used for a long time naturally, and there is no need to buy new products, so it will cost a lot of money. The key now is to save costs.