Residual miscellaneous materials, the materials are crushed by the crushing equipment, and the whole process of production and processing is extremely coherent, which may constitute continuous waste and crushing. In this way, the production and processing of many materials can be completed, but the residues in the material crushing process are There is a lot of raw and auxiliary materials in the internal structure of the equipment. After these materials are crushed, the relevant staff basically cannot make effective identification. Therefore, it is very important to clean up the residual debris in the internal structure of the equipment after each crushing is realized. Mainly, only by disposing of these debris residues, will it not form a mixed application and cause the material purity to be far from enough.

Equipment dust, spice grinder equipment does a good job of crushing the material, and the formation of dust is relatively serious. Because the material turns into a powder state, it is easier to form dust accumulation on the outer layer of the equipment due to the direct influence of the air, causing heat dissipation. The effect is not good, resulting in a decline in performance, so cleaning the outer layer of the device should not be taken lightly.